www.iptech1.com Terms & Conditions | Blanket Order Policy | Credit Application | Link to US | Quality Policy | Testimonials
home page
. . . . . . .
current job openings JOB OPENINGS
Parker Actuators

LCR Miniature

  • Travel to 1000mm
  • Low Cost, OEM Positioner
  • Positional repeatability of +/-0.1 mm
  • 0.5mm, 2mm, and 10mm Leads
  • Pay Loads to 100Newtons
  • Thrust force capacity to 60 Newtons
  • Strip Seal Option
  • Lab Grade, Light Duty Automation
  • Fail Safe Design (no braked needed)
  • Step Motor Driven
  • 22mm, 30, 45mm Cross Section
http://www.iptech1.com/pdf/pa3A.pdf

PROmech LP28

  • Travel to 500mm
  • Low Cost, OEM Positioner
  • Positional repeatability of +/-0.05 mm
  • 1mm, 3mm, 10mm and 25mm Leads
  • Pay Loads to 10lbs
  • Thrust force capacity to 10lbs
  • Strip Seal Option
  • Lab Grade, Light Duty Automation
  • Fail Safe Design (no braked needed)
  • Step Motor Driven
  • 28mm x 28mm Cross Section
http://www.iptech1.com/pdf/pa3.pdf

HPLA

  • 24/7 operation at 100% duty
  • Belt drive for fast, accurate positioning
  • Positional repeatability of +/-0,1 mm
  • Velocity up to 5 meters/sec.
  • Loads to 1400Kg
  • Thrust force capacity to 5600 N
  • Travel to 9 meters or longer with splicing
  • Rugged construction for heavy duty applications
  • Steel or Polymide wheels options
http://www.iptech1.com/pdf/pa1.pdf

ETT Series Electric Thrust Tubular Actuator

  • Thrust values up to 512 N
  • Acceleration range: 200m/s
  • Direct thrust linear motor actuator
  • Three lengths and three sizes
  • ISO flange standard (DIN ISO 15552:2005-12)
http://www.iptech1.com/pdf/pa4.pdf

New ETH Series

  • Thrusts up to 7,000 N
  • 3 profile sizes (ISO 32, 50 & 80)
  • Oversized ballscrews and thrust bearings
  • 4-5X higher force or 10X longer life
  • Dual angular contact thrust bearings
  • Maximum stroke: 1.6 m
  • Inline or parallel motor mounting
  • Nine different ISO mounting options
  • Six different rod end options including Linear Rod Guide Module for additional side load support
  • •Maximum speed: 1.7 m/s
http://www.iptech1.com/pdf/pa5.pdf

ETH ATEX Electric Cylinder

  • Electric thrust cylinder for use in explosive atmospheres
  • High power density
  • Axial forces up to 56 kN
  • Strokes up to 2000mm
  • Repeatability of +/-0.03mm
http://www.iptech1.com/pdf/pa7.pdf

Gantry Robots

  • 24/7 operation at 100% duty
  • Gantry Systems configured with HPLA
  • High Speed Automation
  • Semi Turn-Key Automation
  • Large work envelopes (20’x10’x5’)
  • Multiple Head Option
  • Overhead mechanics (“free up” floorspace)
  • Large Load Capacities
http://www.iptech1.com/pdf/pa2.pdf
From an Applications Engineer