404XR - 412XR Standard Series

• 24/7 operation at 100% duty
• Standard X-Y, X-Y-Z configurations
• Dowel holes for repeatable mounting
• IP30 rated protective strip seals
• Travels up to 2 meters
• Repeatability to +/-1.3m
• Optional single point lube for easy maintenance
• Full range of sizes from 90mm to 285mm wide
• Cable Management Available
• Mult-Axis Systems and Gantry Robot Options
• Standard two week lead-time

http://www.iptech1.com/pdf/pps1.pdf

402XE - 403XE Economy Series

• 24/7 operation at 100% duty
• Integrated Square Rail Bearing
• Rigid Steel body
• Multi-axis designs
• Adjustment free
• Repeatability to +/-5m
• Travels to 655mm
• Two Inch and Inch Wide Stages
• Precision Ground Ball Screw Drive

http://www.iptech1.com/pdf/pps2.pdf

HD Industrial Series

• 24/7 operation at 100% duty
• Standard X-Y, X-Y-Z configurations
• Ultra Stiff Cross Section
• IP30 rated protective strip seals
• Travels up to 2 meters
• Repeatability to +/-8.0m
• Low Cost with prices starting Under $1600
• Full range of sizes from 85mm to 185mm wide
• High Axial & Thrust Loads
• Mult-Axis Systems and Gantry Robot Options
• Standard two week lead-time

http://www.iptech1.com/pdf/hd.pdf

MX80S Miniature Stage Series

• Normal or cleanroom environments
• Multi-axis platform
• Selectable travels: 25,50,100,150 mm.
• 1.5μm Bi-directional Repeatability:
• Travels to 150mm
• Ultra Low Profile of 25mm (linear motor version)
• Stepper or servo motor driven
• Dowel holes for repeatable payload mounting
• Cross Roller Bearing (zero cage creep option)
• Ball Screw or Acme leads of 1.0; 2.0; or 10.0 mm
• Standard two week lead-time

http://www.iptech1.com/pdf/pps3.pdf

ZP Vertical Z-Wedge Table

• 24/7 operation at 100% duty
• Continuous duty
• 25 mm Vertical Travel
• Load Capacity to 167 lbs.
• Positional Repeatablilty to 1 micron
• +/-15 arc.sec. Straightness Travel
• Precision Ground Ball-Screw Drive
• Encoder and Travel Limit Sensors
• Multi-axis compatibility with XR and LXR tables

http://www.iptech1.com/pdf/pps4.pdf

Linear Positioning Stages - Ultra Series

• Sub-micron accuracy
• 2 micron repeatability
• Travels from 50mm to 450mm
• Patented AutoFlex Preload
• Built-in encoder and limits
• Optional open frame construction
• Linear Motor, Acme or Ball Screw Drive
• Unique Encoder Mounting Eliminates Abbe Error
• No Moving Wires

http://www.iptech1.com/pdf/pps5.pdf

200RT Rotary Tables

• Highly repeatable indexing (12 arc sec.)
• Load capacities to 200 lbs.
• 360 degrees continuous travel
• Performance tested worm gear drive
• Selectable table sizes and drive ratio
• Table diameters of 5, 6, 8, 10, or 12 inch
• Dual race angular contact support bearing
• Designed to Mount to Parker Linear Tables
• Standard two week lead-time

http://www.iptech1.com/pdf/pps6.pdf

Primatics Precision Stages

Primatics specializes in the design of precision motion equipment. They manufacture a variety of positioning stages, controllers and complete motion solutions. Choose from a list of confi guration options to best meet your requirements. Whether you need short or long travel, the capacity for heavy or light payloads, slow steady scans or quick movements for assembly processes, they offer a solution for your application.

Markets

• High Precision Inspection, Attachment & Alignment
• High Speed Laser Machining
• Wafer Inspection
• Microelectronics Assembly
• Precision Metrology

PLG Family

• 110mm (4.3”), 160mm (6.3”) and 210mm (8.3”) cross-sectional sizes
• Four motor drivetrain options
• Internal linear or rotary encoder resolution to 0.1 microns
• Prima-Flex™ internal cable management system for fully adjustable limit and home sensors
• Aluminum or Cast Iron base
• All stages individually tested for accuracy, repeatability, straightness and fl atness
• Multi-axis confi gurations available
• Class 10 cleanroom option

http://www.iptech1.com/pdf/pri1.pdf

PCR43

• Only 43mm (1.7”) tall
• Center-driven brushless linear motor eliminates
backlash, windup & stiction
• Utilizes precision cross-roller bearings with an
anti-cage creep option
• Drivetrain and feedback systems are non-contact
and maintenance-free
• Multi-axis confi gurations available
• Class 10 cleanroom option

http://www.iptech1.com/pdf/pri2.pdf

POF115

• Dual-axis motion
• Single or Dual linear motors per axis
• 115mm (4.5”) tall profi le minimizes overall height & tolerance stack
• Open frame confi guration allows access to top and bottom of payload
• Clean, compact design; an advanced cable management system combines all signals into two cables extending from the bottom axis.
• Class 10 cleanroom option

http://www.iptech1.com/pdf/pri3.pdf

PZA25

• Designed for small incremental vertical movements
• Precision rolled-ballscrew drivetrain
• Low profi le; 65mm (2.6”) in lowered position
• Utilizes a moving-wedge design that converts horizontal movement from a ballscrew to vertical elevation
• Integrated brushless servo motor
• Rotary and linear encoder feedback
• Class 10 cleanroom option

http://www.iptech1.com/pdf/pri4.pdf

PDR Family

• Direct-drive continuous rotary motion
• 110mm (4.3), 160mm (6.3) & 210mm (8.3) diameter platens
• Integrated brushless servo motor drivetrain eliminates gear wear, backlash and torque variation
• Internal multiplication electronics
• Oversized cross roller bearing and non-contact drivetrain guarantee long, trouble-free operation
• Class 10 cleanroom option

http://www.iptech1.com/pdf/pri5.pdf

PCL 40

• Travels up to 400mm
• Loads up to 10 kg
• Optional rotary encoder with 1.0 micron resolution
• Two motor options
• Stackable for X,Y motion
• 40mm tall
• English & Metric optical breadboard compatible
• All stages individually tested for accuracy, repeatability, straightness and flatness
• Adjustable limit switches

http://www.iptech1.com/pdf/pri6.pdf

PLR Family

• Limited rotation for angular correction
• 190mm (7.5) & 350mm (13.8) diameter platens
• Precision cross-roller bearings deliver high capacity, excellent rigidity and long life

http://www.iptech1.com/pdf/pri7.pdf

OEM Solutions

Even with thousands of possible confi gurations of standard products, sometimes the right one doesn’t exist for your application and a custom solution is required.

For our standard products, we offer:
• Different finish options
• Special mounting hole patterns
• Custom connector options
• Multi-axis stacks

Full Custon

In some applications, a custom design from the ground up is necessary. Our design team has developed a toolbox of precision design and manufacturing techniques that enable us to quickly turn back-of-the-envelope sketches into CAD concept models for further analysis. We will leverage relationships with our suppliers to meet your price targets, and we can reduce your time to market by acting as an extension of your engineering team. These factors coupled with our effi cient operation can make custom solutions attractive even